Inhalte aufrufen


Profilbild
- - - - -

Linux Mint erkennt BFL-Miner nicht - FTDI-Treiber vorinstalliert?

FTDI Linux Mint Butterflylabs Jalapeno Single SC Treiber USB Erkennen Driver

  • Bitte einloggen zum Antworten
7 Antworten zu diesem Thema

#1 Marikus

Marikus

    Mitglied

  • Mitglieder
  • PunktPunkt
  • 47 Beiträge

Geschrieben: 11 Juni 2014 - 23:28

Hallo Freunde,

 

hat jemand von Euch die BFL-Miner (Jalapeno oder Single SC) auf Linux Mint (oder vielleicht sonst irgendeiner Disribution) zum Laufen bekommen? :unsure:

 

Bei mir läuft auf WindowsXP alles bestens: BFLs an USB werden korrekt erkannt, BFG-Miner startet problemlos (meistens, nicht immer). :)

 

Da der XP-Support ausläuft, gehts für mich auf Linux Mint weiter :P . Warum gerade Linux-Mint? Weil z.B. auf Ubuntu Fehler wie "Abhängigkeiten nicht lösber", etc. auftraten, und ich ein Programm nicht installieren konnte. Auf Linux Mint geht dies problemlos. :)

 

Laut BFL-Webseite soll die Hardware (also die Miner) auch auf Linux von allein erkannt werden, aber das ist bei mir nicht der Fall :( . BFL verweist auf diese Webseite, für den Fall, daß das mit der automatischen Erkennung nicht klappen sollte:

 

http://www.ftdichip....Drivers/VCP.htm

 

Dort kann man sich einen Linux-Treiber (32 und 64 Bit) herunterladen, aber wie installiert man das? :mellow:  (Nicht, daß ich´s nicht versucht hätte, aber nach einigen Stunden gehen einem die Ideen aus) :angry:

 

Beste Grüße und schonmal vielen Dank!


  • blubblibla gefällt das

#2 blubblibla

blubblibla

    Mitglied

  • Banned
  • PunktPunkt
  • 3.688 Beiträge

Geschrieben: 12 Juni 2014 - 01:12

Was genau ist Dein Problem? Die Dinger laufen absolut problemlos unter Linux (ich verwende Debian) mit bfgminer.
 
An welcher Stelle hakt es? Erkennt der bfgminer die Teile nicht? Wie sieht die Ausgabe von dmesg und lsusb aus?



#3 Marikus

Marikus

    Mitglied

  • Mitglieder
  • PunktPunkt
  • 47 Beiträge

Geschrieben: 12 Juni 2014 - 09:44

Hallo Blubblibla,

 

danke für die schnelle Reaktion. Natürlich hätte ich etwas mehr dazu schreiben können, aber das tue ich dann ab jetzt;-)

 

Es hakt daran, daß der BFG-Miner (neueste Version) tatsächlich nichts von den Minern erkennt. Auch vom Linux selbst gibt es keine Reaktion, wenn ein eingeschalteter Miner angeschlossen wird (normalerweise habe ich da sonst immer so einen Ton wenn z.B. ein USB-Stick eingetöpselt wird).

 

Ausgabe des Befehls dmesg:

 

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.13.0-24-generic (buildd@panlong) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #46-Ubuntu SMP Thu Apr 10 19:11:08 UTC 2014 (Ubuntu 3.13.0-24.46-generic 3.13.9)
[    0.000000] Command line: bootkbd=de console-setup/layoutcode=de console-setup/variantcode=nodeadkeys locale=de_DE  persistent noprompt cdrom-detect/try-usb=true file=/cdrom/preseed/mint.seed boot=casper initrd=/casper/initrd.lz splash -- BOOT_IMAGE=/casper/vmlinuz
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000d7fcffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000d7fd0000-0x00000000d7fe55ff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000d7fe5600-0x00000000d7ff7fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000d7ff8000-0x00000000d7ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed9afff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feda0000-0x00000000fedbffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffbfffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.4 present.
[    0.000000] DMI: Hewlett-Packard HP Compaq nw8440 (RH418EA#ABD)/30A3, BIOS 68YVD Ver. F.0F 12/19/2006
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] No AGP bridge found
[    0.000000] e820: last_pfn = 0xd7fd0 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-EFFFF uncachable
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 080000000 mask FC0000000 write-back
[    0.000000]   2 base 0C0000000 mask FF0000000 write-back
[    0.000000]   3 base 0D0000000 mask FF8000000 write-back
[    0.000000]   4 base 0FEDA0000 mask FFFFE0000 uncachable
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] original variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 2GB, type WB
[    0.000000] reg 1, base: 2GB, range: 1GB, type WB
[    0.000000] reg 2, base: 3GB, range: 256MB, type WB
[    0.000000] reg 3, base: 3328MB, range: 128MB, type WB
[    0.000000] reg 4, base: 4175488KB, range: 128KB, type UC
[    0.000000] total RAM covered: 3456M
[    0.000000] Found optimal setting for mtrr clean up
[    0.000000]  gran_size: 64K     chunk_size: 1G     num_reg: 3      lose cover RAM: 0G
[    0.000000] New variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 4GB, type WB
[    0.000000] reg 1, base: 3456MB, range: 128MB, type UC
[    0.000000] reg 2, base: 3584MB, range: 512MB, type UC
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01fdd000, 0x01fddfff] PGTABLE
[    0.000000] BRK [0x01fde000, 0x01fdefff] PGTABLE
[    0.000000] BRK [0x01fdf000, 0x01fdffff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0xd7c00000-0xd7dfffff]
[    0.000000]  [mem 0xd7c00000-0xd7dfffff] page 2M
[    0.000000] BRK [0x01fe0000, 0x01fe0fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0xd4000000-0xd7bfffff]
[    0.000000]  [mem 0xd4000000-0xd7bfffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x80000000-0xd3ffffff]
[    0.000000]  [mem 0x80000000-0xd3ffffff] page 2M
[    0.000000] BRK [0x01fe1000, 0x01fe1fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x00100000-0x7fffffff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x7fffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0xd7e00000-0xd7fcffff]
[    0.000000]  [mem 0xd7e00000-0xd7fcffff] page 4k
[    0.000000] BRK [0x01fe2000, 0x01fe2fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x7ec7d000-0x7fffefff]
[    0.000000] ACPI: RSDP 00000000000f7a10 000024 (v02 HP    )
[    0.000000] ACPI: XSDT 00000000d7fe57c8 00007C (v01 HPQOEM SLIC-MPC 00000001 HP   00000001)
[    0.000000] ACPI: FACP 00000000d7fe5684 0000F4 (v04 HP     30A3     00000003 HP   00000001)
[    0.000000] ACPI: DSDT 00000000d7fe5acc 010239 (v01 HP       nc8430 00010000 MSFT 0100000E)
[    0.000000] ACPI: FACS 00000000d7ff7e80 000040
[    0.000000] ACPI: SLIC 00000000d7fe5844 000176 (v01 HPQOEM SLIC-MPC 00000001 HP   00000001)
[    0.000000] ACPI: HPET 00000000d7fe59bc 000038 (v01 HP     30A3     00000001 HP   00000001)
[    0.000000] ACPI: APIC 00000000d7fe59f4 000068 (v01 HP     30A3     00000001 HP   00000001)
[    0.000000] ACPI: MCFG 00000000d7fe5a5c 00003C (v01 HP     30A3     00000001 HP   00000001)
[    0.000000] ACPI: TCPA 00000000d7fe5a98 000032 (v02 HP     30A3     00000001 HP   00000001)
[    0.000000] ACPI: SSDT 00000000d7ff5d05 000059 (v01 HP       HPQNLP 00000001 MSFT 0100000E)
[    0.000000] ACPI: SSDT 00000000d7ff5d5e 00032A (v01 HP       HPQPAT 00000001 MSFT 0100000E)
[    0.000000] ACPI: SSDT 00000000d7ff691f 00025F (v01 HP      Cpu0Tst 00003000 INTL 20060317)
[    0.000000] ACPI: SSDT 00000000d7ff6b7e 0000A6 (v01 HP      Cpu1Tst 00003000 INTL 20060317)
[    0.000000] ACPI: SSDT 00000000d7ff6c24 0004D7 (v01 HP        CpuPm 00003000 INTL 20060317)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x00000000d7fcffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0xd7fcffff]
[    0.000000]   NODE_DATA [mem 0xd7fcb000-0xd7fcffff]
[    0.000000]  [ffffea0000000000-ffffea00035fffff] PMD -> [ffff8800d3e00000-ffff8800d73fffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009efff]
[    0.000000]   node   0: [mem 0x00100000-0xd7fcffff]
[    0.000000] On node 0 totalpages: 884590
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 13760 pages used for memmap
[    0.000000]   DMA32 zone: 880592 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] e820: [mem 0xd8000000-0xfebfffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 29 pages/cpu @ffff8800d7a00000 s86336 r8192 d24256 u1048576
[    0.000000] pcpu-alloc: s86336 r8192 d24256 u1048576 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 870745
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: bootkbd=de console-setup/layoutcode=de console-setup/variantcode=nodeadkeys locale=de_DE  persistent noprompt cdrom-detect/try-usb=true file=/cdrom/preseed/mint.seed boot=casper initrd=/casper/initrd.lz splash -- BOOT_IMAGE=/casper/vmlinuz
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 3446228K/3538360K available (7338K kernel code, 1138K rwdata, 3388K rodata, 1332K init, 1440K bss, 92132K reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000]     RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000]     RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=2.
[    0.000000]     Offload RCU callbacks from all CPUs
[    0.000000]     Offload RCU callbacks from CPUs: 0-1.
[    0.000000] NR_IRQS:16640 nr_irqs:512 16
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 14155776 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2327.496 MHz processor
[    0.004005] Calibrating delay loop (skipped), value calculated using timer frequency.. 4654.99 BogoMIPS (lpj=9309984)
[    0.004229] pid_max: default: 32768 minimum: 301
[    0.004372] Security Framework initialized
[    0.004511] AppArmor: AppArmor initialized
[    0.004622] Yama: becoming mindful.
[    0.005185] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.009862] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.011494] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.011620] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.012190] Initializing cgroup subsys memory
[    0.012313] Initializing cgroup subsys devices
[    0.012426] Initializing cgroup subsys freezer
[    0.012538] Initializing cgroup subsys blkio
[    0.012650] Initializing cgroup subsys perf_event
[    0.012763] Initializing cgroup subsys hugetlb
[    0.012905] CPU: Physical Processor ID: 0
[    0.013016] CPU: Processor Core ID: 0
[    0.013129] mce: CPU supports 6 MCE banks
[    0.013247] CPU0: Thermal monitoring handled by SMI
[    0.013257] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[    0.013257] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
[    0.013257] tlb_flushall_shift: -1
[    0.013505] Freeing SMP alternatives memory: 32K (ffffffff81e6b000 - ffffffff81e73000)
[    0.015184] ACPI: Core revision 20131115
[    0.020529] ACPI: All ACPI Tables successfully acquired
[    0.024008] ftrace: allocating 28408 entries in 111 pages
[    0.040521] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.080329] smpboot: CPU0: Intel® Core™2 CPU         T7600  @ 2.33GHz (fam: 06, model: 0f, stepping: 06)
[    0.084000] Performance Events: PEBS fmt0-, 4-deep LBR, Core2 events, Intel PMU driver.
[    0.084000] perf_event_intel: PEBS disabled due to CPU errata
[    0.084000] ... version:                2
[    0.084000] ... bit width:              40
[    0.084000] ... generic registers:      2
[    0.084000] ... value mask:             000000ffffffffff
[    0.084000] ... max period:             000000007fffffff
[    0.084000] ... fixed-purpose events:   3
[    0.084000] ... event mask:             0000000700000003
[    0.086336] x86: Booting SMP configuration:
[    0.086221] CPU1: Thermal monitoring handled by SMI
[    0.086450] .... node  #0, CPUs:      #1
[    0.099837] x86: Booted up 1 node, 2 CPUs
[    0.100006] smpboot: Total of 2 processors activated (9309.98 BogoMIPS)
[    0.100215] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.102290] devtmpfs: initialized
[    0.110495] EVM: security.selinux
[    0.110607] EVM: security.SMACK64
[    0.110718] EVM: security.ima
[    0.110829] EVM: security.capability
[    0.110967] PM: Registering ACPI NVS region [mem 0xd7fe5600-0xd7ff7fff] (76288 bytes)
[    0.110967] reboot: HP Compaq Laptop series board detected. Selecting BIOS-method for reboots.
[    0.112396] pinctrl core: initialized pinctrl subsystem
[    0.112582] regulator-dummy: no parameters
[    0.112734] RTC time: 20:28:49, date: 06/11/14
[    0.112885] NET: Registered protocol family 16
[    0.113162] cpuidle: using governor ladder
[    0.113274] cpuidle: using governor menu
[    0.113453] ACPI: bus type PCI registered
[    0.113566] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.113746] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.113870] PCI: not using MMCONFIG
[    0.113981] PCI: Using configuration type 1 for base access
[    0.115166] bio: create slab <bio-0> at 0
[    0.115166] ACPI: Added _OSI(Module Device)
[    0.115166] ACPI: Added _OSI(Processor Device)
[    0.116003] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.116115] ACPI: Added _OSI(Processor Aggregator Device)
[    0.169884] ACPI: SSDT 00000000d7ff6150 00027F (v01 HP      Cpu0Ist 00003000 INTL 20060317)
[    0.170621] ACPI: Dynamic OEM Table Load:
[    0.170935] ACPI: SSDT           (null) 00027F (v01 HP      Cpu0Ist 00003000 INTL 20060317)
[    0.171347] ACPI: SSDT 00000000d7ff6454 0004CB (v01 HP      Cpu0Cst 00003001 INTL 20060317)
[    0.172084] ACPI: Dynamic OEM Table Load:
[    0.172398] ACPI: SSDT           (null) 0004CB (v01 HP      Cpu0Cst 00003001 INTL 20060317)
[    0.172902] ACPI: SSDT 00000000d7ff6088 0000C8 (v01 HP      Cpu1Ist 00003000 INTL 20060317)
[    0.173630] ACPI: Dynamic OEM Table Load:
[    0.173944] ACPI: SSDT           (null) 0000C8 (v01 HP      Cpu1Ist 00003000 INTL 20060317)
[    0.174331] ACPI: SSDT 00000000d7ff63cf 000085 (v01 HP      Cpu1Cst 00003000 INTL 20060317)
[    0.175053] ACPI: Dynamic OEM Table Load:
[    0.175367] ACPI: SSDT           (null) 000085 (v01 HP      Cpu1Cst 00003000 INTL 20060317)
[    0.192118] ACPI: Interpreter enabled
[    0.192235] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
[    0.192559] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
[    0.192894] ACPI: (supports S0 S3 S4 S5)
[    0.193005] ACPI: Using IOAPIC for interrupt routing
[    0.193135] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.196278] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources
[    0.200068] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[    0.200379] ACPI: No dock devices found.
[    0.200899] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[    0.201038] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[    0.202391] ACPI: Power Resource [C1F3] (on)
[    0.202990] ACPI: Power Resource [C200] (on)
[    0.204210] ACPI: Power Resource [C21D] (on)
[    0.207261] ACPI: Power Resource [C225] (off)
[    0.209511] ACPI: Power Resource [C323] (off)
[    0.209678] ACPI: Power Resource [C324] (off)
[    0.209840] ACPI: Power Resource [C325] (off)
[    0.210005] ACPI: Power Resource [C326] (off)
[    0.210166] ACPI: Power Resource [C327] (off)
[    0.210331] ACPI: Power Resource [C328] (off)
[    0.210475] ACPI: Power Resource [C329] (off)
[    0.214125] ACPI: PCI Root Bridge [C002] (domain 0000 [bus 00-ff])
[    0.214245] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.214371] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.219842] acpi PNP0A08:00: host bridge window [io  0x0000-0x0cf7] (ignored)
[    0.219845] acpi PNP0A08:00: host bridge window [io  0x0d00-0xffff] (ignored)
[    0.219847] acpi PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[    0.219850] acpi PNP0A08:00: host bridge window [mem 0xd8000000-0xfedfffff] (ignored)
[    0.219852] acpi PNP0A08:00: host bridge window [mem 0xfee01000-0xffffffff] (ignored)
[    0.219855] acpi PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored)
[    0.219857] PCI: root bus 00: using default resources
[    0.219860] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[    0.220180] PCI host bridge to bus 0000:00
[    0.220295] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.220408] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
[    0.220522] pci_bus 0000:00: root bus resource [mem 0x00000000-0xfffffffff]
[    0.220644] pci 0000:00:00.0: [8086:27a0] type 00 class 0x060000
[    0.220760] pci 0000:00:01.0: [8086:27a1] type 01 class 0x060400
[    0.220809] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.220942] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
[    0.220966] pci 0000:00:1b.0: reg 0x10: [mem 0xf4700000-0xf4703fff 64bit]
[    0.221070] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.221168] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
[    0.221277] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.221341] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.221495] pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400
[    0.221604] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.221668] pci 0000:00:1c.1: System wakeup disabled by ACPI
[    0.221828] pci 0000:00:1c.3: [8086:27d6] type 01 class 0x060400
[    0.221937] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.222004] pci 0000:00:1c.3: System wakeup disabled by ACPI
[    0.222156] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
[    0.222213] pci 0000:00:1d.0: reg 0x20: [io  0x5000-0x501f]
[    0.222318] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
[    0.222375] pci 0000:00:1d.1: reg 0x20: [io  0x5020-0x503f]
[    0.222477] pci 0000:00:1d.1: System wakeup disabled by ACPI
[    0.222626] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
[    0.222683] pci 0000:00:1d.2: reg 0x20: [io  0x5040-0x505f]
[    0.222784] pci 0000:00:1d.2: System wakeup disabled by ACPI
[    0.222932] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
[    0.222989] pci 0000:00:1d.3: reg 0x20: [io  0x5060-0x507f]
[    0.223089] pci 0000:00:1d.3: System wakeup disabled by ACPI
[    0.223250] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
[    0.223274] pci 0000:00:1d.7: reg 0x10: [mem 0xf4704000-0xf47043ff]
[    0.223381] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.223439] pci 0000:00:1d.7: System wakeup disabled by ACPI
[    0.223594] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[    0.223719] pci 0000:00:1e.0: System wakeup disabled by ACPI
[    0.223874] pci 0000:00:1f.0: [8086:27b9] type 00 class 0x060100
[    0.223987] pci 0000:00:1f.0: address space collision: [io  0x1000-0x107f] conflicts with ACPI CPU throttle [??? 0x00001010-0x00001015 flags 0x80000000]
[    0.224008] pci 0000:00:1f.0: quirk: [io  0x1100-0x113f] claimed by ICH6 GPIO
[    0.224125] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0500 (mask 007f)
[    0.224253] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 0238 (mask 0007)
[    0.224501] pci 0000:00:1f.2: [8086:27c4] type 00 class 0x010180
[    0.224522] pci 0000:00:1f.2: reg 0x10: [io  0x0000-0x0007]
[    0.224535] pci 0000:00:1f.2: reg 0x14: [io  0x0000-0x0003]
[    0.224547] pci 0000:00:1f.2: reg 0x18: [io  0x0000-0x0007]
[    0.224559] pci 0000:00:1f.2: reg 0x1c: [io  0x0000-0x0003]
[    0.224571] pci 0000:00:1f.2: reg 0x20: [io  0x5080-0x508f]
[    0.224627] pci 0000:00:1f.2: PME# supported from D3hot
[    0.224790] pci 0000:01:00.0: [1002:71c5] type 00 class 0x030000
[    0.224814] pci 0000:01:00.0: reg 0x10: [mem 0xe0000000-0xefffffff pref]
[    0.224830] pci 0000:01:00.0: reg 0x14: [io  0x4000-0x40ff]
[    0.224845] pci 0000:01:00.0: reg 0x18: [mem 0xf4600000-0xf460ffff]
[    0.224895] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[    0.224965] pci 0000:01:00.0: supports D1 D2
[    0.225016] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.225153] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.225203] pci 0000:00:01.0:   bridge window [io  0x4000-0x4fff]
[    0.225207] pci 0000:00:01.0:   bridge window [mem 0xf4600000-0xf46fffff]
[    0.225211] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[    0.225302] acpiphp: Slot [1] registered
[    0.225385] pci 0000:08:00.0: [14e4:16fd] type 00 class 0x020000
[    0.225416] pci 0000:08:00.0: reg 0x10: [mem 0xf4100000-0xf410ffff 64bit]
[    0.225585] pci 0000:08:00.0: PME# supported from D3hot D3cold
[    0.225619] pci 0000:08:00.0: System wakeup disabled by ACPI
[    0.225697] pci 0000:08:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.225765] pci 0000:00:1c.0: PCI bridge to [bus 08]
[    0.225818] pci 0000:00:1c.0:   bridge window [mem 0xf4100000-0xf41fffff]
[    0.225978] pci 0000:10:00.0: [8086:4222] type 00 class 0x028000
[    0.226034] pci 0000:10:00.0: reg 0x10: [mem 0xf4000000-0xf4000fff]
[    0.226455] pci 0000:10:00.0: PME# supported from D0 D3hot D3cold
[    0.226533] pci 0000:10:00.0: System wakeup disabled by ACPI
[    0.226614] pci 0000:10:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.226697] pci 0000:00:1c.1: PCI bridge to [bus 10]
[    0.226751] pci 0000:00:1c.1:   bridge window [mem 0xf4000000-0xf40fffff]
[    0.226869] acpiphp: Slot [1-1] registered
[    0.226970] pci 0000:00:1c.3: PCI bridge to [bus 20]
[    0.227021] pci 0000:00:1c.3:   bridge window [io  0x2000-0x3fff]
[    0.227026] pci 0000:00:1c.3:   bridge window [mem 0xf0000000-0xf3ffffff]
[    0.227138] pci 0000:02:06.0: [104c:8039] type 02 class 0x060700
[    0.227167] pci 0000:02:06.0: reg 0x10: [mem 0xf4200000-0xf4200fff]
[    0.227214] pci 0000:02:06.0: supports D1 D2
[    0.227216] pci 0000:02:06.0: PME# supported from D0 D1 D2 D3hot
[    0.227284] pci 0000:02:06.1: [104c:803a] type 00 class 0x0c0010
[    0.227312] pci 0000:02:06.1: reg 0x10: [mem 0xf4201000-0xf42017ff]
[    0.227328] pci 0000:02:06.1: reg 0x14: [mem 0xf4204000-0xf4207fff]
[    0.227441] pci 0000:02:06.1: supports D1 D2
[    0.227443] pci 0000:02:06.1: PME# supported from D0 D1 D2 D3hot
[    0.227508] pci 0000:02:06.2: [104c:803b] type 00 class 0x018000
[    0.227535] pci 0000:02:06.2: reg 0x10: [mem 0xf4208000-0xf4208fff]
[    0.227660] pci 0000:02:06.2: supports D1 D2
[    0.227662] pci 0000:02:06.2: PME# supported from D0 D1 D2 D3hot
[    0.227726] pci 0000:02:06.3: [104c:803c] type 00 class 0x080500
[    0.227754] pci 0000:02:06.3: reg 0x10: [mem 0xf4209000-0xf42090ff]
[    0.227878] pci 0000:02:06.3: supports D1 D2
[    0.227880] pci 0000:02:06.3: PME# supported from D0 D1 D2 D3hot
[    0.228064] pci 0000:02:06.4: [104c:803d] type 00 class 0x078000
[    0.228092] pci 0000:02:06.4: reg 0x10: [mem 0xf420a000-0xf420afff]
[    0.228108] pci 0000:02:06.4: reg 0x14: [mem 0xf420b000-0xf420bfff]
[    0.228219] pci 0000:02:06.4: supports D1 D2
[    0.228221] pci 0000:02:06.4: PME# supported from D0 D1 D2 D3hot
[    0.228326] pci 0000:00:1e.0: PCI bridge to [bus 02-03] (subtractive decode)
[    0.228382] pci 0000:00:1e.0:   bridge window [mem 0xf4200000-0xf45fffff]
[    0.228390] pci 0000:00:1e.0:   bridge window [io  0x0000-0xffff] (subtractive decode)
[    0.228393] pci 0000:00:1e.0:   bridge window [mem 0x00000000-0xfffffffff] (subtractive decode)
[    0.228454] pci_bus 0000:03: busn_res: can not insert [bus 03-ff] under [bus 02-03] (conflicts with (null) [bus 02-03])
[    0.228460] pci_bus 0000:03: busn_res: [bus 03-ff] end is updated to 06
[    0.228463] pci_bus 0000:03: busn_res: can not insert [bus 03-06] under [bus 02-03] (conflicts with (null) [bus 02-03])
[    0.228469] pci_bus 0000:03: [bus 03-06] partially hidden behind transparent bridge 0000:02 [bus 02-03]
[    0.229560] ACPI: PCI Interrupt Link [C10F] (IRQs *10 11)
[    0.229856] ACPI: PCI Interrupt Link [C110] (IRQs 10 *11)
[    0.230150] ACPI: PCI Interrupt Link [C111] (IRQs 10 *11)
[    0.230442] ACPI: PCI Interrupt Link [C112] (IRQs *10 11)
[    0.230735] ACPI: PCI Interrupt Link [C12B] (IRQs *10 11)
[    0.231027] ACPI: PCI Interrupt Link [C12C] (IRQs 10 *11)
[    0.231320] ACPI: PCI Interrupt Link [C12D] (IRQs *10 11)
[    0.231572] ACPI Exception: AE_NOT_FOUND, Evaluating _PRS (20131115/pci_link-180)
[    0.232157] ACPI: Enabled 7 GPEs in block 00 to 1F
[    0.232322] ACPI: \_SB_.C002: notify handler is installed
[    0.232390] Found 1 acpi root devices
[    0.232502] ACPI : EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
[    0.232646] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.232646] vgaarb: loaded
[    0.232646] vgaarb: bridge control possible 0000:01:00.0
[    0.232646] SCSI subsystem initialized
[    0.232646] libata version 3.00 loaded.
[    0.232646] ACPI: bus type USB registered
[    0.232646] usbcore: registered new interface driver usbfs
[    0.232646] usbcore: registered new interface driver hub
[    0.232646] usbcore: registered new device driver usb
[    0.232646] PCI: Using ACPI for IRQ routing
[    0.236057] PCI: pci_cache_line_size set to 64 bytes
[    0.236144] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.236146] e820: reserve RAM buffer [mem 0xd7fd0000-0xd7ffffff]
[    0.236248] NetLabel: Initializing
[    0.236295] NetLabel:  domain hash size = 128
[    0.236342] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.236407] NetLabel:  unlabeled traffic allowed by default
[    0.236467] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.236467] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.236467] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.238392] Switched to clocksource hpet
[    0.244347] AppArmor: AppArmor Filesystem Enabled
[    0.244445] pnp: PnP ACPI init
[    0.244509] ACPI: bus type PNP registered
[    0.244737] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.244789] system 00:00: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.244839] system 00:00: [mem 0x00100000-0xd7ffffff] could not be reserved
[    0.244891] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.245428] pnp 00:01: Plug and Play ACPI device, IDs PNP0501 PNP0500 (active)
[    0.245796] pnp 00:02: [dma 1]
[    0.245885] pnp 00:02: Plug and Play ACPI device, IDs PNP0401 (active)
[    0.245975] pnp 00:03: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active)
[    0.246013] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.246025] pnp 00:05: [dma 4]
[    0.246049] pnp 00:05: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.246076] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.246112] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.246189] pnp 00:08: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.246228] pnp 00:09: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.246262] pnp 00:0a: Plug and Play ACPI device, IDs SYN010d SYN0100 SYN0002 PNP0f13 (active)
[    0.246419] system 00:0b: [io  0x0500-0x055f] has been reserved
[    0.246470] system 00:0b: [io  0x0800-0x080f] has been reserved
[    0.246520] system 00:0b: [mem 0xffb00000-0xffbfffff] has been reserved
[    0.246570] system 00:0b: [mem 0xfff00000-0xffffffff] has been reserved
[    0.246620] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.247156] pnp 00:0c: Plug and Play ACPI device, IDs HPQ0004 (active)
[    0.247223] system 00:0d: [io  0x04d0-0x04d1] has been reserved
[    0.247274] system 00:0d: [io  0x1000-0x107f] could not be reserved
[    0.247323] system 00:0d: [io  0x1100-0x113f] has been reserved
[    0.247373] system 00:0d: [io  0x1200-0x121f] has been reserved
[    0.247422] system 00:0d: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.247472] system 00:0d: [mem 0xfec00000-0xfec000ff] could not be reserved
[    0.247522] system 00:0d: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.247572] system 00:0d: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.247621] system 00:0d: [mem 0xfed90000-0xfed9afff] has been reserved
[    0.247671] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.248407] system 00:0e: [mem 0x000cfe00-0x000cffff] has been reserved
[    0.248458] system 00:0e: [mem 0xfeda0000-0xfedbffff] has been reserved
[    0.248508] system 00:0e: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.248558] system 00:0e: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.248577] pnp: PnP ACPI: found 15 devices
[    0.248624] ACPI: bus type PNP unregistered
[    0.256232] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 08] add_size 1000
[    0.256237] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 08] add_size 200000
[    0.256249] pci 0000:00:1c.1: bridge window [io  0x1000-0x0fff] to [bus 10] add_size 1000
[    0.256252] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 10] add_size 200000
[    0.256264] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 20] add_size 200000
[    0.256284] pci 0000:02:06.0: res[13]=[io  0x0100-0x00ff] get_res_add_size add_size 100
[    0.256287] pci 0000:02:06.0: res[14]=[io  0x0100-0x00ff] get_res_add_size add_size 100
[    0.256290] pci 0000:00:1e.0: bridge window [io  0x1000-0x0fff] to [bus 02-03] add_size 1000
[    0.256293] pci 0000:02:06.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
[    0.256296] pci 0000:00:1e.0: bridge window [mem 0x04000000-0x03ffffff pref] to [bus 02-03] add_size 4000000
[    0.256304] pci 0000:00:1f.0: BAR 13: [io  0x1000-0x107f] has bogus alignment
[    0.256356] pci 0000:00:1e.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
[    0.256359] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[    0.256362] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[    0.256364] pci 0000:00:1c.3: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[    0.256367] pci 0000:00:1c.0: res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
[    0.256370] pci 0000:00:1c.1: res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
[    0.256372] pci 0000:00:1e.0: res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
[    0.256378] pci 0000:00:1e.0: BAR 15: assigned [mem 0xd8000000-0xdbffffff pref]
[    0.256435] pci 0000:00:1c.0: BAR 15: assigned [mem 0xdc000000-0xdc1fffff 64bit pref]
[    0.256491] pci 0000:00:1c.1: BAR 15: assigned [mem 0xdc200000-0xdc3fffff 64bit pref]
[    0.256548] pci 0000:00:1c.3: BAR 15: assigned [mem 0xdc400000-0xdc5fffff 64bit pref]
[    0.256606] pci 0000:00:1c.0: BAR 13: assigned [io  0x6000-0x6fff]
[    0.256655] pci 0000:00:1c.1: BAR 13: assigned [io  0x7000-0x7fff]
[    0.256705] pci 0000:00:1e.0: BAR 13: assigned [io  0x8000-0x8fff]
[    0.256757] pci 0000:01:00.0: BAR 6: assigned [mem 0xf4620000-0xf463ffff pref]
[    0.256814] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.256863] pci 0000:00:01.0:   bridge window [io  0x4000-0x4fff]
[    0.256914] pci 0000:00:01.0:   bridge window [mem 0xf4600000-0xf46fffff]
[    0.256965] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[    0.257023] pci 0000:00:1c.0: PCI bridge to [bus 08]
[    0.257073] pci 0000:00:1c.0:   bridge window [io  0x6000-0x6fff]
[    0.257126] pci 0000:00:1c.0:   bridge window [mem 0xf4100000-0xf41fffff]
[    0.257179] pci 0000:00:1c.0:   bridge window [mem 0xdc000000-0xdc1fffff 64bit pref]
[    0.257240] pci 0000:00:1c.1: PCI bridge to [bus 10]
[    0.257290] pci 0000:00:1c.1:   bridge window [io  0x7000-0x7fff]
[    0.257343] pci 0000:00:1c.1:   bridge window [mem 0xf4000000-0xf40fffff]
[    0.257395] pci 0000:00:1c.1:   bridge window [mem 0xdc200000-0xdc3fffff 64bit pref]
[    0.257457] pci 0000:00:1c.3: PCI bridge to [bus 20]
[    0.257507] pci 0000:00:1c.3:   bridge window [io  0x2000-0x3fff]
[    0.257560] pci 0000:00:1c.3:   bridge window [mem 0xf0000000-0xf3ffffff]
[    0.257612] pci 0000:00:1c.3:   bridge window [mem 0xdc400000-0xdc5fffff 64bit pref]
[    0.258084] pci 0000:02:06.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
[    0.258087] pci 0000:02:06.0: res[16]=[mem 0x04000000-0x03ffffff] get_res_add_size add_size 4000000
[    0.258089] pci 0000:02:06.0: res[13]=[io  0x0100-0x00ff] get_res_add_size add_size 100
[    0.258092] pci 0000:02:06.0: res[14]=[io  0x0100-0x00ff] get_res_add_size add_size 100
[    0.258095] pci 0000:02:06.0: BAR 15: assigned [mem 0xd8000000-0xdbffffff pref]
[    0.258154] pci 0000:02:06.0: BAR 16: can't assign mem (size 0x4000000)
[    0.258204] pci 0000:02:06.0: BAR 13: assigned [io  0x8000-0x80ff]
[    0.258253] pci 0000:02:06.0: BAR 14: assigned [io  0x8400-0x84ff]
[    0.258306] pci 0000:02:06.0: BAR 16: can't assign mem (size 0x4000000)
[    0.258356] pci 0000:02:06.0: CardBus bridge to [bus 03-06]
[    0.258404] pci 0000:02:06.0:   bridge window [io  0x8000-0x80ff]
[    0.258457] pci 0000:02:06.0:   bridge window [io  0x8400-0x84ff]
[    0.258510] pci 0000:02:06.0:   bridge window [mem 0xd8000000-0xdbffffff pref]
[    0.258569] pci 0000:00:1e.0: PCI bridge to [bus 02-03]
[    0.258619] pci 0000:00:1e.0:   bridge window [io  0x8000-0x8fff]
[    0.258672] pci 0000:00:1e.0:   bridge window [mem 0xf4200000-0xf45fffff]
[    0.258724] pci 0000:00:1e.0:   bridge window [mem 0xd8000000-0xdbffffff pref]
[    0.258786] pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
[    0.258789] pci_bus 0000:00: resource 5 [mem 0x00000000-0xfffffffff]
[    0.258791] pci_bus 0000:01: resource 0 [io  0x4000-0x4fff]
[    0.258794] pci_bus 0000:01: resource 1 [mem 0xf4600000-0xf46fffff]
[    0.258796] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
[    0.258799] pci_bus 0000:08: resource 0 [io  0x6000-0x6fff]
[    0.258801] pci_bus 0000:08: resource 1 [mem 0xf4100000-0xf41fffff]
[    0.258803] pci_bus 0000:08: resource 2 [mem 0xdc000000-0xdc1fffff 64bit pref]
[    0.258806] pci_bus 0000:10: resource 0 [io  0x7000-0x7fff]
[    0.258808] pci_bus 0000:10: resource 1 [mem 0xf4000000-0xf40fffff]
[    0.258811] pci_bus 0000:10: resource 2 [mem 0xdc200000-0xdc3fffff 64bit pref]
[    0.258813] pci_bus 0000:20: resource 0 [io  0x2000-0x3fff]
[    0.258815] pci_bus 0000:20: resource 1 [mem 0xf0000000-0xf3ffffff]
[    0.258818] pci_bus 0000:20: resource 2 [mem 0xdc400000-0xdc5fffff 64bit pref]
[    0.258820] pci_bus 0000:02: resource 0 [io  0x8000-0x8fff]
[    0.258823] pci_bus 0000:02: resource 1 [mem 0xf4200000-0xf45fffff]
[    0.258825] pci_bus 0000:02: resource 2 [mem 0xd8000000-0xdbffffff pref]
[    0.258827] pci_bus 0000:02: resource 4 [io  0x0000-0xffff]
[    0.258830] pci_bus 0000:02: resource 5 [mem 0x00000000-0xfffffffff]
[    0.258832] pci_bus 0000:03: resource 0 [io  0x8000-0x80ff]
[    0.258834] pci_bus 0000:03: resource 1 [io  0x8400-0x84ff]
[    0.258837] pci_bus 0000:03: resource 2 [mem 0xd8000000-0xdbffffff pref]
[    0.258880] NET: Registered protocol family 2
[    0.259118] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.259350] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.259640] TCP: Hash tables configured (established 32768 bind 32768)
[    0.259746] TCP: reno registered
[    0.259799] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.259886] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.260034] NET: Registered protocol family 1
[    0.261149] pci 0000:01:00.0: Boot video device
[    0.261179] PCI: CLS 64 bytes, default 64
[    0.261263] Trying to unpack rootfs image as initramfs...
[    4.725565] Freeing initrd memory: 19976K (ffff88007ec7d000 - ffff88007ffff000)
[    4.726016] microcode: CPU0 sig=0x6f6, pf=0x20, revision=0x48
[    4.726069] microcode: CPU1 sig=0x6f6, pf=0x20, revision=0x48
[    4.726205] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    4.726262] Scanning for low memory corruption every 60 seconds
[    4.726603] Initialise system trusted keyring
[    4.726709] audit: initializing netlink socket (disabled)
[    4.726781] type=2000 audit(1402518533.720:1): initialized
[    4.756295] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    4.758038] VFS: Disk quotas dquot_6.5.2
[    4.758132] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    4.758753] fuse init (API version 7.22)
[    4.758894] msgmni has been set to 6769
[    4.759003] Key type big_key registered
[    4.759643] Key type asymmetric registered
[    4.759694] Asymmetric key parser 'x509' registered
[    4.759776] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    4.759876] io scheduler noop registered
[    4.759927] io scheduler deadline registered (default)
[    4.760025] io scheduler cfq registered
[    4.760347] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    4.760516] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[    4.760708] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
[    4.760894] pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X
[    4.760994] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    4.761064] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    4.761167] intel_idle: does not run on family 6 model 15
[    4.761174] ipmi message handler version 39.2
[    4.764975] ACPI: AC Adapter [C1BC] (on-line)
[    4.765261] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input0
[    4.765321] ACPI: Sleep Button [C246]
[    4.765408] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[    4.765493] ACPI: Lid Switch [C23E]
[    4.765589] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    4.765646] ACPI: Power Button [PWRF]
[    4.765779] ACPI: Fan [C32A] (off)
[    4.765874] ACPI: Fan [C32B] (off)
[    4.765972] ACPI: Fan [C32C] (off)
[    4.766069] ACPI: Fan [C32D] (off)
[    4.766166] ACPI: Fan [C32E] (off)
[    4.766263] ACPI: Fan [C32F] (off)
[    4.766339] ACPI: Fan [C330] (off)
[    4.767537] Monitor-Mwait will be used to enter C-1 state
[    4.767544] Monitor-Mwait will be used to enter C-2 state
[    4.767548] tsc: Marking TSC unstable due to TSC halts in idle
[    4.767600] ACPI: acpi_idle registered with cpuidle
[    4.814885] thermal LNXTHERM:00: registered as thermal_zone0
[    4.814935] ACPI: Thermal Zone [TZ0] (72 C)
[    4.843765] thermal LNXTHERM:01: registered as thermal_zone1
[    4.843814] ACPI: Thermal Zone [TZ1] (70 C)
[    4.872981] thermal LNXTHERM:02: registered as thermal_zone2
[    4.873030] ACPI: Thermal Zone [TZ2] (65 C)
[    4.888407] thermal LNXTHERM:03: registered as thermal_zone3
[    4.888457] ACPI: Thermal Zone [TZ3] (16 C)
[    4.894181] thermal LNXTHERM:04: registered as thermal_zone4
[    4.894243] ACPI: Thermal Zone [TZ4] (57 C)
[    4.894380] GHES: HEST is not enabled!
[    4.894458] ACPI: Battery Slot [C1BE] (battery absent)
[    4.894535] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    4.894568] ACPI: Battery Slot [C1BD] (battery absent)
[    4.915258] 00:01: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    4.917596] Linux agpgart interface v0.103
[    4.917873] tpm_tis 00:03: 1.2 TPM (device-id 0xB, rev-id 16)
[    5.036125] tpm_tis 00:03: Adjusting TPM timeout parameters.
[    5.816098] tpm_tis 00:03: TPM is disabled/deactivated (0x7)
[    5.818086] brd: module loaded
[    5.819126] loop: module loaded
[    5.819300] ata_piix 0000:00:1f.2: version 2.13
[    5.819422] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[    5.820120] scsi0 : ata_piix
[    5.820286] scsi1 : ata_piix
[    5.820378] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x5080 irq 14
[    5.820425] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x5088 irq 15
[    5.820815] libphy: Fixed MDIO Bus: probed
[    5.820962] tun: Universal TUN/TAP device driver, 1.6
[    5.821008] tun: © 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    5.821120] PPP generic driver version 2.4.2
[    5.821260] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    5.821310] ehci-pci: EHCI PCI platform driver
[    5.821508] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    5.821561] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    5.821629] ehci-pci 0000:00:1d.7: debug port 1
[    5.825581] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[    5.825598] ehci-pci 0000:00:1d.7: irq 20, io mem 0xf4704000
[    5.836053] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    5.836233] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    5.836303] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.836357] usb usb1: Product: EHCI Host Controller
[    5.836403] usb usb1: Manufacturer: Linux 3.13.0-24-generic ehci_hcd
[    5.836450] usb usb1: SerialNumber: 0000:00:1d.7
[    5.836625] hub 1-0:1.0: USB hub found
[    5.836679] hub 1-0:1.0: 8 ports detected
[    5.837050] ehci-platform: EHCI generic platform driver
[    5.837104] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    5.837150] ohci-pci: OHCI PCI platform driver
[    5.837205] ohci-platform: OHCI generic platform driver
[    5.837256] uhci_hcd: USB Universal Host Controller Interface driver
[    5.837421] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    5.837474] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    5.837555] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00005000
[    5.837662] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    5.837710] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.837763] usb usb2: Product: UHCI Host Controller
[    5.837810] usb usb2: Manufacturer: Linux 3.13.0-24-generic uhci_hcd
[    5.837857] usb usb2: SerialNumber: 0000:00:1d.0
[    5.838020] hub 2-0:1.0: USB hub found
[    5.838072] hub 2-0:1.0: 2 ports detected
[    5.838339] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    5.838392] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    5.838482] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00005020
[    5.838587] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    5.838635] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.838689] usb usb3: Product: UHCI Host Controller
[    5.838735] usb usb3: Manufacturer: Linux 3.13.0-24-generic uhci_hcd
[    5.838782] usb usb3: SerialNumber: 0000:00:1d.1
[    5.838942] hub 3-0:1.0: USB hub found
[    5.838994] hub 3-0:1.0: 2 ports detected
[    5.839259] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    5.839310] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    5.839399] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00005040
[    5.839503] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    5.839552] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.839606] usb usb4: Product: UHCI Host Controller
[    5.839651] usb usb4: Manufacturer: Linux 3.13.0-24-generic uhci_hcd
[    5.839698] usb usb4: SerialNumber: 0000:00:1d.2
[    5.839868] hub 4-0:1.0: USB hub found
[    5.839922] hub 4-0:1.0: 2 ports detected
[    5.840196] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    5.840249] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    5.840339] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00005060
[    5.840447] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    5.840497] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.840553] usb usb5: Product: UHCI Host Controller
[    5.840601] usb usb5: Manufacturer: Linux 3.13.0-24-generic uhci_hcd
[    5.840650] usb usb5: SerialNumber: 0000:00:1d.3
[    5.840812] hub 5-0:1.0: USB hub found
[    5.840867] hub 5-0:1.0: 2 ports detected
[    5.841098] i8042: PNP: PS/2 Controller [PNP0303:C21A,PNP0f13:C21B] at 0x60,0x64 irq 1,12
[    5.842732] i8042: Detected active multiplexing controller, rev 1.1
[    5.843542] serio: i8042 KBD port at 0x60,0x64 irq 1
[    5.843595] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    5.843668] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    5.843739] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    5.843810] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    5.844038] mousedev: PS/2 mouse device common for all mice
[    5.844353] rtc_cmos 00:07: RTC can wake from S4
[    5.844996] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[    5.845076] rtc_cmos 00:07: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    5.845200] device-mapper: uevent: version 1.0.3
[    5.845340] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[    5.845403] ledtrig-cpu: registered to indicate activity on CPUs
[    5.845560] TCP: cubic registered
[    5.845710] NET: Registered protocol family 10
[    5.845959] NET: Registered protocol family 17
[    5.846016] Key type dns_resolver registered
[    5.846390] Loading compiled-in X.509 certificates
[    5.847584] Loaded X.509 cert 'Magrathea: Glacier signing key: 00a5a65759de474bc5c43120880c1b94a539f431'
[    5.847674] registered taskstats version 1
[    5.850971] Key type trusted registered
[    5.853748] Key type encrypted registered
[    5.856391] AppArmor: AppArmor sha1 policy hashing enabled
[    5.869287] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    5.904085] tpm_tis 00:03: A TPM error (7) occurred attempting to read a pcr value
[    5.904153] IMA: No TPM chip found, activating TPM-bypass!
[    5.904662] regulator-dummy: disabling
[    5.904790]   Magic number: 2:873:497
[    5.904985] rtc_cmos 00:07: setting system clock to 2014-06-11 20:28:55 UTC (1402518535)
[    5.911356] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    5.911407] EDD information not available.
[    5.911496] PM: Hibernation image not present or could not be loaded.
[    6.016439] ata2.00: ATAPI: TSSTcorpCD/DVDW TS-L632D, HH17, max MWDMA2
[    6.048292] ata2.00: configured for MWDMA2
[    6.072456] scsi 1:0:0:0: CD-ROM            TSSTcorp CD/DVDW TS-L632D HH17 PQ: 0 ANSI: 5
[    6.104557] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    6.104616] cdrom: Uniform CD-ROM driver Revision: 3.20
[    6.104797] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    6.104986] sr 1:0:0:0: Attached scsi generic sg0 type 5
[    6.107105] Freeing unused kernel memory: 1332K (ffffffff81d1e000 - ffffffff81e6b000)
[    6.107164] Write protecting the kernel read-only data: 12288k
[    6.110482] Freeing unused kernel memory: 844K (ffff88000172d000 - ffff880001800000)
[    6.113165] Freeing unused kernel memory: 708K (ffff880001b4f000 - ffff880001c00000)
[    6.133888] systemd-udevd[105]: starting version 204
[    6.162295] pps_core: LinuxPPS API ver. 1 registered
[    6.162351] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    6.167704] [drm] Initialized drm 1.1.0 20060810
[    6.171949] PTP clock support registered
[    6.182518] tg3.c:v3.134 (Sep 16, 2013)
[    6.186512] wmi: Mapper loaded
[    6.203745] sdhci: Secure Digital Host Controller Interface driver
[    6.203817] sdhci: Copyright© Pierre Ossman
[    6.205829] [drm] radeon kernel modesetting enabled.
[    6.206193] sdhci-pci 0000:02:06.3: SDHCI controller found [104c:803c] (rev 0)
[    6.206197] [drm] initializing kernel modesetting (RV530 0x1002:0x71C5 0x103C:0x30B4).
[    6.206218] [drm] register mmio base: 0xF4600000
[    6.206219] [drm] register mmio size: 65536
[    6.206330] ATOM BIOS: HP
[    6.206354] [drm] Generation 2 PCI interface, using max accessible memory
[    6.206358] radeon 0000:01:00.0: VRAM: 256M 0x0000000000000000 - 0x000000000FFFFFFF (256M used)
[    6.206361] radeon 0000:01:00.0: GTT: 512M 0x0000000010000000 - 0x000000002FFFFFFF
[    6.206382] [drm] Detected VRAM RAM=256M, BAR=256M
[    6.206383] [drm] RAM width 128bits DDR
[    6.206450] [TTM] Zone  kernel: Available graphics memory: 1734560 kiB
[    6.206451] [TTM] Initializing pool allocator
[    6.206455] [TTM] Initializing DMA pool allocator
[    6.206477] [drm] radeon: 256M of VRAM memory ready
[    6.206479] [drm] radeon: 512M of GTT memory ready.
[    6.206491] [drm] GART: num cpu pages 131072, num gpu pages 131072
[    6.207292] sdhci-pci 0000:02:06.3: dummy supplies not allowed
[    6.207346] mmc0: no vqmmc regulator found
[    6.207401] sdhci-pci 0000:02:06.3: dummy supplies not allowed
[    6.207560] mmc0: no vmmc regulator found
[    6.207831] mmc0: SDHCI controller on PCI [0000:02:06.3] using PIO
[    6.213169] [Firmware Bug]: _BCQ is used instead of _BQC
[    6.213335] ACPI: Video Device [C136] (multi-head: yes  rom: no  post: no)
[    6.213519] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[    6.215490] acpi device:03: registered as cooling_device9
[    6.215767] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input8
[    6.224668] [drm] radeon: 1 quad pipes, 2 z pipes initialized.
[    6.225791] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
[    6.225888] radeon 0000:01:00.0: WB enabled
[    6.225943] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000010000000 and cpu addr 0xffff8800d1964000
[    6.226012] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    6.226071] [drm] Driver supports precise vblank timestamp query.
[    6.226169] radeon 0000:01:00.0: irq 44 for MSI/MSI-X
[    6.226184] radeon 0000:01:00.0: radeon: using MSI.
[    6.226258] [drm] radeon: irq initialized.
[    6.226319] [drm] Loading R500 Microcode
[    6.226581] [drm] radeon: ring at 0x0000000010001000
[    6.226668] [drm] ring test succeeded in 10 usecs
[    6.227021] [drm] ib test succeeded in 0 usecs
[    6.227531] [drm] radeon atom DIG backlight initialized
[    6.227583] [drm] Radeon Display Connectors
[    6.227633] [drm] Connector 0:
[    6.227683] [drm]   VGA-1
[    6.227732] [drm]   DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[    6.227792] [drm]   Encoders:
[    6.227842] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[    6.227895] [drm] Connector 1:
[    6.227945] [drm]   LVDS-1
[    6.227994] [drm]   DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[    6.228085] [drm]   Encoders:
[    6.228134] [drm]     LCD1: INTERNAL_LVTM1
[    6.228184] [drm] Connector 2:
[    6.228232] [drm]   SVIDEO-1
[    6.228281] [drm]   Encoders:
[    6.228329] [drm]     TV1: INTERNAL_KLDSCP_DAC2
[    6.228379] [drm] Connector 3:
[    6.228428] [drm]   DVI-I-1
[    6.228476] [drm]   HPD1
[    6.228525] [drm]   DDC: 0x7e60 0x7e60 0x7e64 0x7e64 0x7e68 0x7e68 0x7e6c 0x7e6c
[    6.228583] [drm]   Encoders:
[    6.228632] [drm]     DFP1: INTERNAL_KLDSCP_TMDS1
[    6.228705] [drm] radeon: power management initialized
[    6.270218] tg3 0000:08:00.0 eth0: Tigon3 [partno(BCM95751M) rev 4201] (PCI Express) MAC address 00:17:a4:e1:0b:2f
[    6.270285] tg3 0000:08:00.0 eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[    6.270348] tg3 0000:08:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[    6.270406] tg3 0000:08:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[    6.280081] firewire_ohci 0000:02:06.1: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
[    6.632392] [drm] fb mappable at 0xE00C0000
[    6.632446] [drm] vram apper at 0xE0000000
[    6.632494] [drm] size 9216000
[    6.632541] [drm] fb depth is 24
[    6.632588] [drm]    pitch is 7680
[    6.632737] fbcon: radeondrmfb (fb0) is primary device
[    6.668092] usb 1-4: new high-speed USB device number 4 using ehci-pci
[    6.780226] firewire_core 0000:02:06.1: created device fw0: GUID 00023f9929011d0e, S400
[    6.801321] usb 1-4: New USB device found, idVendor=0781, idProduct=5580
[    6.801323] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    6.801325] usb 1-4: Product: Extreme
[    6.801326] usb 1-4: Manufacturer: SanDisk
[    6.801328] usb 1-4: SerialNumber: AA010302131616465916
[    7.030526] Console: switching to colour frame buffer device 240x75
[    7.037090] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[    7.037121] radeon 0000:01:00.0: registered panic notifier
[    7.037160] [drm] Initialized radeon 2.36.0 20080528 for 0000:01:00.0 on minor 0
[    7.059883] usb-storage 1-4:1.0: USB Mass Storage device detected
[    7.060068] scsi2 : usb-storage 1-4:1.0
[    7.060175] usbcore: registered new interface driver usb-storage
[    7.376081] usb 2-1: new full-speed USB device number 2 using uhci_hcd
[    7.555086] usb 2-1: New USB device found, idVendor=03f0, idProduct=171d
[    7.555096] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    7.555102] usb 2-1: Product: HP Integrated Module
[    7.555108] usb 2-1: Manufacturer: Broadcom Corp
[    7.668081] usb 3-1: new full-speed USB device number 2 using uhci_hcd
[    7.836073] usb 3-1: New USB device found, idVendor=08ff, idProduct=2580
[    7.836082] usb 3-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    7.836089] usb 3-1: Product: Fingerprint Sensor
[    8.060756] scsi 2:0:0:0: Direct-Access     SanDisk  Extreme          0001 PQ: 0 ANSI: 6
[    8.061247] sd 2:0:0:0: Attached scsi generic sg1 type 0
[    8.062495] sd 2:0:0:0: [sda] 31277232 512-byte logical blocks: (16.0 GB/14.9 GiB)
[    8.063487] sd 2:0:0:0: [sda] Write Protect is off
[    8.063494] sd 2:0:0:0: [sda] Mode Sense: 33 00 00 08
[    8.064483] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    8.069016]  sda: sda1 sda2
[    8.073122] sd 2:0:0:0: [sda] Attached SCSI disk
[    9.172691] random: nonblocking pool is initialized
[    9.804918] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[   10.029382] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[   12.660320] EXT4-fs (loop1): mounting ext2 file system using the ext4 subsystem
[   12.665055] EXT4-fs (loop1): warning: mounting unchecked fs, running e2fsck is recommended
[   12.672358] EXT4-fs (loop1): mounted filesystem without journal. Opts: (null)
[   12.913001] FAT-fs (sda2): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[   13.518632] FAT-fs (sda2): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[   14.122372] FAT-fs (sda2): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[   16.044650] EXT4-fs error (device loop1): ext4_mb_generate_buddy:756: group 2, 26895 clusters in bitmap, 26896 in gd; block bitmap corrupt.
[   21.548850] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   21.719541] systemd-udevd[1924]: starting version 204
[   21.960874] lp: driver loaded but no devices found
[   21.987018] ppdev: user-space parallel port driver
[   22.026489] parport_pc 00:02: reported by Plug and Play ACPI
[   22.026573] parport0: PC-style at 0x378 (0x778), irq 7, dma 1 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[   22.126704] lp0: using parport0 (interrupt-driven).
[   22.132705] hp_accel: laptop model unknown, using default axes configuration
[   22.133107] Bluetooth: Core ver 2.17
[   22.133129] NET: Registered protocol family 31
[   22.133131] Bluetooth: HCI device and connection manager initialized
[   22.133142] Bluetooth: HCI socket layer initialized
[   22.133145] Bluetooth: L2CAP socket layer initialized
[   22.133151] Bluetooth: SCO socket layer initialized
[   22.154530] lis3lv02d: 12 bits sensor found
[   22.182753] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   22.182757] Bluetooth: BNEP filters: protocol multicast
[   22.182770] Bluetooth: BNEP socket layer initialized
[   22.224089] Bluetooth: RFCOMM TTY layer initialized
[   22.224107] Bluetooth: RFCOMM socket layer initialized
[   22.224114] Bluetooth: RFCOMM ver 1.11
[   22.412075] init: cups main process (2029) killed by HUP signal
[   22.412093] init: cups main process ended, respawning
[   22.505485] intel_rng: FWH not detected
[   22.533453] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input9
[   22.616077] cfg80211: Calling CRDA to update world regulatory domain
[   22.616299] ACPI Warning: 0x0000000000001028-0x000000000000102f SystemIO conflicts with Region \_SB_.C002.C003.C0BC 1 (20131115/utaddress-251)
[   22.616306] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   22.616311] ACPI Warning: 0x0000000000001130-0x000000000000113f SystemIO conflicts with Region \_SB_.C002.C003.C0CE 1 (20131115/utaddress-251)
[   22.616316] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   22.616318] ACPI Warning: 0x0000000000001100-0x000000000000112f SystemIO conflicts with Region \_SB_.C002.C003.C0CE 1 (20131115/utaddress-251)
[   22.616321] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   22.616323] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   22.623497] yenta_cardbus 0000:02:06.0: CardBus bridge found [103c:30a3]
[   22.623529] yenta_cardbus 0000:02:06.0: CardBus bridge to [bus 03-06]
[   22.623532] yenta_cardbus 0000:02:06.0:   bridge window [io  0x8000-0x80ff]
[   22.623538] yenta_cardbus 0000:02:06.0:   bridge window [io  0x8400-0x84ff]
[   22.623544] yenta_cardbus 0000:02:06.0:   bridge window [mem 0xd8000000-0xdbffffff pref]
[   22.623551] yenta_cardbus 0000:02:06.0:   bridge window [mem 0xdc800000-0xdcbfffff]
[   22.623559] yenta_cardbus 0000:02:06.0: Enabling burst memory read transactions
[   22.623565] yenta_cardbus 0000:02:06.0: Using INTVAL to route CSC interrupts to PCI
[   22.623567] yenta_cardbus 0000:02:06.0: Routing CardBus interrupts to PCI
[   22.623574] yenta_cardbus 0000:02:06.0: TI: mfunc 0x01011b22, devctl 0x64
[   22.638942] WARNING! power/level is deprecated; use power/control instead
[   22.646553] leds_ss4200: no LED devices found
[   22.727131] usbcore: registered new interface driver btusb
[   22.769920] iwl3945: Intel® PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:s
[   22.769924] iwl3945: Copyright© 2003-2011 Intel Corporation
[   22.770009] iwl3945 0000:10:00.0: can't disable ASPM; OS doesn't have ASPM control
[   22.825742] iwl3945 0000:10:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels
[   22.825747] iwl3945 0000:10:00.0: Detected Intel Wireless WiFi Link 3945ABG
[   22.825830] iwl3945 0000:10:00.0: irq 45 for MSI/MSI-X
[   22.852741] yenta_cardbus 0000:02:06.0: ISA IRQ mask 0x0c78, PCI irq 18
[   22.852748] yenta_cardbus 0000:02:06.0: Socket status: 30000006
[   22.852753] pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #03 to #06
[   22.852783] yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge window: [io  0x8000-0x8fff]
[   22.852786] yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge window: [mem 0xf4200000-0xf45fffff]
[   22.852790] pcmcia_socket pcmcia_socket0: cs: memory probe 0xf4200000-0xf45fffff:
[   22.852794]  excluding 0xf4200000-0xf423ffff
[   22.852805] yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge window: [mem 0xd8000000-0xdbffffff pref]
[   22.852808] pcmcia_socket pcmcia_socket0: cs: memory probe 0xd8000000-0xdbffffff:
[   22.852816]  excluding 0xd8000000-0xdbffffff
[   22.873959] ieee80211 phy0: Selected rate control algorithm 'iwl-3945-rs'
[   22.987207] kvm: disabled by bios
[   23.011698] kvm: disabled by bios
[   23.031762] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[   23.067069] autoconfig: line_outs=1 (0x5/0x0/0x0/0x0/0x0) type:speaker
[   23.067074]    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   23.067076]    hp_outs=1 (0x6/0x0/0x0/0x0/0x0)
[   23.067077]    mono: mono_out=0x0
[   23.067079]    inputs:
[   23.067082]      Mic=0x8
[   23.067083]      Internal Mic=0x18
[   23.067085]      Line=0x9
[   23.116422] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[   23.116579] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[   23.116693] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[   23.118799] device-mapper: multipath: version 1.6.0 loaded
[   23.121515] psmouse serio4: synaptics: Touchpad model: 1, fw: 6.2, id: 0x2580b1, caps: 0xa44793/0x300000/0x0, board id: 71, fw id: 240405
[   23.121522] psmouse serio4: synaptics: serio: Synaptics pass-through port at isa0060/serio4/input0
[   23.162906] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input13
[   23.629169] init: failsafe main process (2172) killed by TERM signal
[   23.733090] input: HP WMI hotkeys as /devices/virtual/input/input18
[   23.961996] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff:
[   23.962006]  excluding 0xc0000-0xcffff 0xe0000-0xfffff
[   23.962032] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff:
[   23.962039]  excluding 0xa0000000-0xa0ffffff
[   23.962059] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff:
[   23.962066]  excluding 0x60000000-0x60ffffff
[   23.987785] cfg80211: World regulatory domain updated:
[   23.987790] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   23.987792] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   23.987795] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   23.987797] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   23.987799] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   23.987801] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   25.056822] init: samba-ad-dc main process (2343) terminated with status 1
[   25.296299] init: alsa-restore main process (2426) terminated with status 99
[   25.303450] tg3 0000:08:00.0: irq 47 for MSI/MSI-X
[   25.504115] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   25.504511] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   25.529339] iwl3945 0000:10:00.0: loaded firmware version 15.32.2.9
[   25.608273] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   25.608627] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   25.980915] init: plymouth-upstart-bridge main process ended, respawning
[   25.989802] init: plymouth-upstart-bridge main process (2672) terminated with status 1
[   25.989819] init: plymouth-upstart-bridge main process ended, respawning
[   26.564028] psmouse serio5: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
[   27.200555] tg3 0000:08:00.0 eth0: Link is up at 100 Mbps, full duplex
[   27.200565] tg3 0000:08:00.0 eth0: Flow control is on for TX and on for RX
[   27.203621] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   29.541941] input: PS/2 Generic Mouse as /devices/platform/i8042/serio4/serio5/input/input17
[   31.608046] FAT-fs (sda2): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[   32.045638] wlan0: authenticate with a0:f3:c1:e5:6d:1e
[   32.049167] wlan0: direct probe to a0:f3:c1:e5:6d:1e (try 1/3)
[   32.252051] wlan0: send auth to a0:f3:c1:e5:6d:1e (try 2/3)
[   32.254326] wlan0: authenticated
[   32.256319] wlan0: associate with a0:f3:c1:e5:6d:1e (try 1/3)
[   32.270051] wlan0: RX AssocResp from a0:f3:c1:e5:6d:1e (capab=0x31 status=0 aid=1)
[   32.273237] wlan0: associated
[   32.273275] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   34.778266] wlan0: deauthenticating from a0:f3:c1:e5:6d:1e by local choice (reason=2)
[   34.801239] wlan0: authenticate with a0:f3:c1:e5:6d:1e
[   34.801433] wlan0: send auth to a0:f3:c1:e5:6d:1e (try 1/3)
[   34.802239] cfg80211: Calling CRDA to update world regulatory domain
[   34.807228] wlan0: authenticated
[   34.808111] wlan0: associate with a0:f3:c1:e5:6d:1e (try 1/3)
[   34.808796] cfg80211: World regulatory domain updated:
[   34.808799] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   34.808802] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   34.808804] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   34.808806] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   34.808808] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   34.808811] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   34.835611] wlan0: RX AssocResp from a0:f3:c1:e5:6d:1e (capab=0x31 status=0 aid=1)
[   34.840213] wlan0: associated
[   62.316049] ieee80211 phy0: wlan0: No probe response from AP a0:f3:c1:e5:6d:1e after 500ms, disconnecting.
[   62.360461] cfg80211: Calling CRDA to update world regulatory domain
[   62.366329] cfg80211: World regulatory domain updated:
[   62.366334] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   62.366337] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   62.366339] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   62.366341] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   62.366343] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   62.366346] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   65.565042] wlan0: authenticate with a0:f3:c1:e5:6d:1e
[   65.566218] wlan0: send auth to a0:f3:c1:e5:6d:1e (try 1/3)
[   65.573304] wlan0: authenticated
[   65.576339] wlan0: associate with a0:f3:c1:e5:6d:1e (try 1/3)
[   65.580517] wlan0: RX AssocResp from a0:f3:c1:e5:6d:1e (capab=0x31 status=0 aid=1)
[   65.586673] wlan0: associated
[   96.972064] perf samples too long (2505 > 2500), lowering kernel.perf_event_max_sample_rate to 50000

 

Gleich gehts weiter... (Content_too_long)


Bearbeitet von Marikus, 12 Juni 2014 - 12:30,


#4 Marikus

Marikus

    Mitglied

  • Mitglieder
  • PunktPunkt
  • 47 Beiträge

Geschrieben: 12 Juni 2014 - 12:33

Hier der Rest:

 

[  313.308023] EXT4-fs (loop1): error count: 292
[  313.308029] EXT4-fs (loop1): initial error at 1402159027: ext4_lookup:1437: inode 294990
[  313.308033] EXT4-fs (loop1): last error at 1402518545: ext4_mb_generate_buddy:756
[  427.746466] perf samples too long (5002 > 5000), lowering kernel.perf_event_max_sample_rate to 25000
[  793.034991] systemd-hostnamed[4054]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
[ 2867.052046] usb 1-5: new high-speed USB device number 5 using ehci-pci
[ 2867.189439] usb 1-5: New USB device found, idVendor=0403, idProduct=6014
[ 2867.189444] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2867.189447] usb 1-5: Product: BitFORCE SHA256 SC
[ 2867.189449] usb 1-5: Manufacturer: Butterfly Labs
[ 2867.189452] usb 1-5: SerialNumber: FTWP297T
[ 2867.226629] usbcore: registered new interface driver usbserial
[ 2867.226648] usbcore: registered new interface driver usbserial_generic
[ 2867.226659] usbserial: USB Serial support registered for generic
[ 2867.234133] usbcore: registered new interface driver ftdi_sio
[ 2867.234162] usbserial: USB Serial support registered for FTDI USB Serial Device
[ 2867.234258] ftdi_sio 1-5:1.0: FTDI USB Serial Device converter detected
[ 2867.234298] usb 1-5: Detected FT232H
[ 2867.234301] usb 1-5: Number of endpoints 2
[ 2867.234303] usb 1-5: Endpoint 1 MaxPacketSize 512
[ 2867.234306] usb 1-5: Endpoint 2 MaxPacketSize 512
[ 2867.234308] usb 1-5: Setting MaxPacketSize 512
[ 2867.235923] usb 1-5: FTDI USB Serial Device converter now attached to ttyUSB0
[ 2884.624075] usb 1-6: new high-speed USB device number 6 using ehci-pci
[ 2884.756940] usb 1-6: New USB device found, idVendor=1908, idProduct=0225
[ 2884.756946] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2884.756949] usb 1-6: Product: USB2.0 Device
[ 2884.756951] usb 1-6: Manufacturer: Generic
[ 2884.756954] usb 1-6: SerialNumber: 20120218120009
[ 2884.758514] usb-storage 1-6:1.0: USB Mass Storage device detected
[ 2884.764062] scsi3 : usb-storage 1-6:1.0
[ 2885.764725] scsi 3:0:0:0: Direct-Access     Generic  Mass-Storage     1.09 PQ: 0 ANSI: 2
[ 2885.769009] sd 3:0:0:0: Attached scsi generic sg2 type 0
[ 2886.476459] sd 3:0:0:0: [sdb] 15835136 512-byte logical blocks: (8.10 GB/7.55 GiB)
[ 2886.477450] sd 3:0:0:0: [sdb] Write Protect is off
[ 2886.477454] sd 3:0:0:0: [sdb] Mode Sense: 03 00 00 00
[ 2886.478444] sd 3:0:0:0: [sdb] No Caching mode page found
[ 2886.478448] sd 3:0:0:0: [sdb] Assuming drive cache: write through
[ 2886.482572] sd 3:0:0:0: [sdb] No Caching mode page found
[ 2886.482578] sd 3:0:0:0: [sdb] Assuming drive cache: write through
[ 2886.483968]  sdb: sdb1
[ 2886.488823] sd 3:0:0:0: [sdb] No Caching mode page found
[ 2886.488828] sd 3:0:0:0: [sdb] Assuming drive cache: write through
[ 2886.488832] sd 3:0:0:0: [sdb] Attached SCSI removable disk
[ 2886.775330] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 3351.386120] usb 1-6: USB disconnect, device number 6
[ 3354.780065] usb 1-6: new high-speed USB device number 7 using ehci-pci
[ 3354.912911] usb 1-6: New USB device found, idVendor=1908, idProduct=0225
[ 3354.912917] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3354.912920] usb 1-6: Product: USB2.0 Device
[ 3354.912923] usb 1-6: Manufacturer: Generic
[ 3354.912925] usb 1-6: SerialNumber: 20120218120009
[ 3354.914560] usb-storage 1-6:1.0: USB Mass Storage device detected
[ 3354.920073] scsi4 : usb-storage 1-6:1.0
[ 3355.920691] scsi 4:0:0:0: Direct-Access     Generic  Mass-Storage     1.09 PQ: 0 ANSI: 2
[ 3355.925122] sd 4:0:0:0: Attached scsi generic sg2 type 0
[ 3356.632927] sd 4:0:0:0: [sdb] 15835136 512-byte logical blocks: (8.10 GB/7.55 GiB)
[ 3356.633925] sd 4:0:0:0: [sdb] Write Protect is off
[ 3356.633930] sd 4:0:0:0: [sdb] Mode Sense: 03 00 00 00
[ 3356.634925] sd 4:0:0:0: [sdb] No Caching mode page found
[ 3356.634930] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 3356.640066] sd 4:0:0:0: [sdb] No Caching mode page found
[ 3356.640074] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 3356.641432]  sdb: sdb1
[ 3356.734433] sd 4:0:0:0: [sdb] No Caching mode page found
[ 3356.734441] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 3356.734446] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 3356.942929] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 3605.454280] usb 1-5: USB disconnect, device number 5
[ 3605.454494] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0
[ 3605.454511] ftdi_sio 1-5:1.0: device disconnected
[ 3611.304048] usb 1-5: new high-speed USB device number 8 using ehci-pci
[ 3611.441333] usb 1-5: New USB device found, idVendor=0403, idProduct=6014
[ 3611.441339] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3611.441341] usb 1-5: Product: BitFORCE SHA256 SC
[ 3611.441344] usb 1-5: Manufacturer: Butterfly Labs
[ 3611.441346] usb 1-5: SerialNumber: FTWP297T
[ 3611.443626] ftdi_sio 1-5:1.0: FTDI USB Serial Device converter detected
[ 3611.443665] usb 1-5: Detected FT232H
[ 3611.443668] usb 1-5: Number of endpoints 2
[ 3611.443670] usb 1-5: Endpoint 1 MaxPacketSize 512
[ 3611.443673] usb 1-5: Endpoint 2 MaxPacketSize 512
[ 3611.443675] usb 1-5: Setting MaxPacketSize 512
[ 3611.443994] usb 1-5: FTDI USB Serial Device converter now attached to ttyUSB0
[ 3626.342781] usb 1-5: USB disconnect, device number 8
[ 3626.342987] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0
[ 3626.343003] ftdi_sio 1-5:1.0: device disconnected
[ 3629.164056] usb 1-5: new high-speed USB device number 9 using ehci-pci
[ 3629.301473] usb 1-5: New USB device found, idVendor=0403, idProduct=6014
[ 3629.301479] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3629.301482] usb 1-5: Product: BitFORCE SHA256 SC
[ 3629.301484] usb 1-5: Manufacturer: Butterfly Labs
[ 3629.301487] usb 1-5: SerialNumber: FTWP297T
[ 3629.303786] ftdi_sio 1-5:1.0: FTDI USB Serial Device converter detected
[ 3629.303832] usb 1-5: Detected FT232H
[ 3629.303835] usb 1-5: Number of endpoints 2
[ 3629.303837] usb 1-5: Endpoint 1 MaxPacketSize 512
[ 3629.303840] usb 1-5: Endpoint 2 MaxPacketSize 512
[ 3629.303842] usb 1-5: Setting MaxPacketSize 512
[ 3629.304333] usb 1-5: FTDI USB Serial Device converter now attached to ttyUSB0
[ 3780.731570] usb 1-5: USB disconnect, device number 9
[ 3780.731937] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0
[ 3780.731957] ftdi_sio 1-5:1.0: device disconnected
[ 3784.408090] usb 1-5: new high-speed USB device number 10 using ehci-pci
[ 3784.545370] usb 1-5: New USB device found, idVendor=0403, idProduct=6014
[ 3784.545376] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3784.545379] usb 1-5: Product: BitFORCE SHA256 SC
[ 3784.545382] usb 1-5: Manufacturer: Butterfly Labs
[ 3784.545384] usb 1-5: SerialNumber: FTWP297T
[ 3784.549045] ftdi_sio 1-5:1.0: FTDI USB Serial Device converter detected
[ 3784.549081] usb 1-5: Detected FT232H
[ 3784.549083] usb 1-5: Number of endpoints 2
[ 3784.549086] usb 1-5: Endpoint 1 MaxPacketSize 512
[ 3784.549088] usb 1-5: Endpoint 2 MaxPacketSize 512
[ 3784.549091] usb 1-5: Setting MaxPacketSize 512
[ 3784.549417] usb 1-5: FTDI USB Serial Device converter now attached to ttyUSB0
[ 4482.928466] usb 1-5: USB disconnect, device number 10
[ 4482.928693] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0
[ 4482.928709] ftdi_sio 1-5:1.0: device disconnected
[ 4484.090827] usb 1-6: USB disconnect, device number 7
[ 4487.528054] usb 1-6: new high-speed USB device number 11 using ehci-pci
[ 4487.665384] usb 1-6: New USB device found, idVendor=0403, idProduct=6014
[ 4487.665389] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4487.665392] usb 1-6: Product: BitFORCE SHA256 SC
[ 4487.665395] usb 1-6: Manufacturer: Butterfly Labs
[ 4487.665397] usb 1-6: SerialNumber: FTWP297T
[ 4487.667696] ftdi_sio 1-6:1.0: FTDI USB Serial Device converter detected
[ 4487.667738] usb 1-6: Detected FT232H
[ 4487.667741] usb 1-6: Number of endpoints 2
[ 4487.667743] usb 1-6: Endpoint 1 MaxPacketSize 512
[ 4487.667746] usb 1-6: Endpoint 2 MaxPacketSize 512
[ 4487.667748] usb 1-6: Setting MaxPacketSize 512
[ 4487.668247] usb 1-6: FTDI USB Serial Device converter now attached to ttyUSB0
[ 4645.312034] ieee80211 phy0: wlan0: No probe response from AP a0:f3:c1:e5:6d:1e after 500ms, disconnecting.
[ 4645.324340] cfg80211: Calling CRDA to update world regulatory domain
[ 4645.328900] cfg80211: World regulatory domain updated:
[ 4645.328905] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 4645.328908] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4645.328910] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4645.328912] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 4645.328914] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4645.328917] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4648.524860] wlan0: authenticate with a0:f3:c1:e5:6d:1e
[ 4648.527296] wlan0: send auth to a0:f3:c1:e5:6d:1e (try 1/3)
[ 4648.728020] wlan0: send auth to a0:f3:c1:e5:6d:1e (try 2/3)
[ 4648.932128] wlan0: send auth to a0:f3:c1:e5:6d:1e (try 3/3)
[ 4649.136029] wlan0: authentication with a0:f3:c1:e5:6d:1e timed out
[ 4661.206158] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 5306.401112] usb 1-6: USB disconnect, device number 11
[ 5306.401304] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0
[ 5306.401321] ftdi_sio 1-6:1.0: device disconnected
[ 7244.684350] EXT4-fs error (device loop1): ext4_lookup:1437: inode #294990: comm nmbd: deleted inode referenced: 295082
[ 7244.684562] EXT4-fs error (device loop1): ext4_lookup:1437: inode #294990: comm nmbd: deleted inode referenced: 295082
[53509.632075] usb 1-6: new high-speed USB device number 12 using ehci-pci
[53509.769281] usb 1-6: New USB device found, idVendor=0403, idProduct=6014
[53509.769287] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[53509.769290] usb 1-6: Product: BitFORCE SHA256 SC
[53509.769292] usb 1-6: Manufacturer: Butterfly Labs
[53509.769295] usb 1-6: SerialNumber: FTWP297T
[53509.771569] ftdi_sio 1-6:1.0: FTDI USB Serial Device converter detected
[53509.771605] usb 1-6: Detected FT232H
[53509.771608] usb 1-6: Number of endpoints 2
[53509.771611] usb 1-6: Endpoint 1 MaxPacketSize 512
[53509.771613] usb 1-6: Endpoint 2 MaxPacketSize 512
[53509.771616] usb 1-6: Setting MaxPacketSize 512
[53509.771943] usb 1-6: FTDI USB Serial Device converter now attached to ttyUSB0
[53543.716042] usb 1-5: new high-speed USB device number 13 using ehci-pci
[53543.848914] usb 1-5: New USB device found, idVendor=1908, idProduct=0225
[53543.848920] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[53543.848923] usb 1-5: Product: USB2.0 Device
[53543.848925] usb 1-5: Manufacturer: Generic
[53543.848928] usb 1-5: SerialNumber: 20120218120009
[53543.849736] usb-storage 1-5:1.0: USB Mass Storage device detected
[53543.860029] scsi5 : usb-storage 1-5:1.0
[53544.860700] scsi 5:0:0:0: Direct-Access     Generic  Mass-Storage     1.09 PQ: 0 ANSI: 2
[53544.861089] sd 5:0:0:0: Attached scsi generic sg2 type 0
[53545.570181] sd 5:0:0:0: [sdb] 15835136 512-byte logical blocks: (8.10 GB/7.55 GiB)
[53545.571174] sd 5:0:0:0: [sdb] Write Protect is off
[53545.571178] sd 5:0:0:0: [sdb] Mode Sense: 03 00 00 00
[53545.572238] sd 5:0:0:0: [sdb] No Caching mode page found
[53545.572243] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[53545.575925] sd 5:0:0:0: [sdb] No Caching mode page found
[53545.575932] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[53545.577328]  sdb: sdb1
[53545.580428] sd 5:0:0:0: [sdb] No Caching mode page found
[53545.580434] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[53545.580439] sd 5:0:0:0: [sdb] Attached SCSI removable disk
[53545.869936] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[53960.164470] wlan0: authenticate with a0:f3:c1:e5:6d:1e
[53960.164615] wlan0: send auth to a0:f3:c1:e5:6d:1e (try 1/3)
[53960.174967] wlan0: authenticated
[53960.176091] wlan0: associate with a0:f3:c1:e5:6d:1e (try 1/3)
[53960.380058] wlan0: associate with a0:f3:c1:e5:6d:1e (try 2/3)
[53960.584028] wlan0: associate with a0:f3:c1:e5:6d:1e (try 3/3)
[53960.788026] wlan0: association with a0:f3:c1:e5:6d:1e timed out
[53973.012741] wlan0: authenticate with a0:f3:c1:e5:6d:1e
[53973.015041] wlan0: send auth to a0:f3:c1:e5:6d:1e (try 1/3)
[53973.216020] wlan0: send auth to a0:f3:c1:e5:6d:1e (try 2/3)
[53973.420020] wlan0: send auth to a0:f3:c1:e5:6d:1e (try 3/3)
[53973.624044] wlan0: authentication with a0:f3:c1:e5:6d:1e timed out
[54060.372784] wlan0: authenticate with a0:f3:c1:e5:6d:1e
[54060.375428] wlan0: direct probe to a0:f3:c1:e5:6d:1e (try 1/3)
[54060.576021] wlan0: direct probe to a0:f3:c1:e5:6d:1e (try 2/3)
[54060.780026] wlan0: direct probe to a0:f3:c1:e5:6d:1e (try 3/3)
[54060.984024] wlan0: authentication with a0:f3:c1:e5:6d:1e timed out
[54425.136874] wlan0: authenticate with a0:f3:c1:e5:6d:1e
[54425.139585] wlan0: send auth to a0:f3:c1:e5:6d:1e (try 1/3)
[54425.340023] wlan0: send auth to a0:f3:c1:e5:6d:1e (try 2/3)
[54425.544024] wlan0: send auth to a0:f3:c1:e5:6d:1e (try 3/3)
[54425.748022] wlan0: authentication with a0:f3:c1:e5:6d:1e timed out
[54862.145101] wlan0: authenticate with a0:f3:c1:e5:6d:1e
[54862.146208] wlan0: send auth to a0:f3:c1:e5:6d:1e (try 1/3)
[54862.348027] wlan0: send auth to a0:f3:c1:e5:6d:1e (try 2/3)
[54862.350249] wlan0: authenticated
[54862.352359] wlan0: associate with a0:f3:c1:e5:6d:1e (try 1/3)
[54862.556024] wlan0: associate with a0:f3:c1:e5:6d:1e (try 2/3)
[54862.760121] wlan0: associate with a0:f3:c1:e5:6d:1e (try 3/3)
[54862.964031] wlan0: association with a0:f3:c1:e5:6d:1e timed out
[54884.196939] wlan0: authenticate with a0:f3:c1:e5:6d:1e
[54884.198217] wlan0: direct probe to a0:f3:c1:e5:6d:1e (try 1/3)
[54884.400026] wlan0: direct probe to a0:f3:c1:e5:6d:1e (try 2/3)
[54884.604027] wlan0: direct probe to a0:f3:c1:e5:6d:1e (try 3/3)
[54884.808022] wlan0: authentication with a0:f3:c1:e5:6d:1e timed out
[56799.140504] wlan0: authenticate with a0:f3:c1:e5:6d:1e
[56799.140596] wlan0: send auth to a0:f3:c1:e5:6d:1e (try 1/3)
[56799.344026] wlan0: send auth to a0:f3:c1:e5:6d:1e (try 2/3)
[56799.548025] wlan0: send auth to a0:f3:c1:e5:6d:1e (try 3/3)
[56799.560131] wlan0: authenticated
[56799.564057] wlan0: associate with a0:f3:c1:e5:6d:1e (try 1/3)
[56799.768023] wlan0: associate with a0:f3:c1:e5:6d:1e (try 2/3)
[56799.778385] wlan0: RX AssocResp from a0:f3:c1:e5:6d:1e (capab=0x31 status=0 aid=1)
[56799.781706] wlan0: associated
[56799.781746] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[56809.312065] ieee80211 phy0: wlan0: No probe response from AP a0:f3:c1:e5:6d:1e after 500ms, disconnecting.
[56809.324504] cfg80211: Calling CRDA to update world regulatory domain
[56809.329356] cfg80211: World regulatory domain updated:
[56809.329361] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[56809.329364] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[56809.329366] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[56809.329368] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[56809.329370] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[56809.329373] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[56812.524949] wlan0: authenticate with a0:f3:c1:e5:6d:1e
[56812.528093] wlan0: send auth to a0:f3:c1:e5:6d:1e (try 1/3)
[56812.732081] wlan0: send auth to a0:f3:c1:e5:6d:1e (try 2/3)
[56812.936043] wlan0: send auth to a0:f3:c1:e5:6d:1e (try 3/3)
[56813.140028] wlan0: authentication with a0:f3:c1:e5:6d:1e timed out
[56821.548712] EXT4-fs error (device loop1): ext4_lookup:1437: inode #294990: comm nmbd: deleted inode referenced: 295082
[56821.548770] EXT4-fs error (device loop1): ext4_lookup:1437: inode #294990: comm nmbd: deleted inode referenced: 295082
[56824.877107] wlan0: authenticate with a0:f3:c1:e5:6d:1e
[56824.878343] wlan0: send auth to a0:f3:c1:e5:6d:1e (try 1/3)
[56825.080040] wlan0: send auth to a0:f3:c1:e5:6d:1e (try 2/3)
[56825.111826] wlan0: authenticated
[56825.116035] wlan0: associate with a0:f3:c1:e5:6d:1e (try 1/3)
[56825.205388] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[56825.205891] wlan0: deauthenticating from a0:f3:c1:e5:6d:1e by local choice (reason=3)
[56828.393640] wlan0: associate with a0:f3:c1:e5:6d:1e (try 2/3)
[56828.596038] wlan0: associate with a0:f3:c1:e5:6d:1e (try 3/3)
[56828.800031] wlan0: association with a0:f3:c1:e5:6d:1e timed out



#5 Marikus

Marikus

    Mitglied

  • Mitglieder
  • PunktPunkt
  • 47 Beiträge

Geschrieben: 12 Juni 2014 - 12:35

Ausgabe von lsusb:

 

Bus 001 Device 012: ID 0403:6014 Future Technology Devices International, Ltd FT232H Single HS USB-UART/FIFO IC
Bus 001 Device 013: ID 1908:0225 GEMBIRD
Bus 001 Device 004: ID 0781:5580 SanDisk Corp. SDCZ80 Flash Drive
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 08ff:2580 AuthenTec, Inc. AES2501 Fingerprint Sensor
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 03f0:171d Hewlett-Packard Bluetooth 2.0 Interface [Broadcom BCM2045]
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

 

Die Ausgabe von dmesg sagt mir leider überhaupt nichts, aber der Miner erscheint dort zumindest schonmal. Die Ausgabe von lsusb sollte doch auch den Miner enthalten, oder. :unsure:


Bearbeitet von Marikus, 12 Juni 2014 - 16:46,


#6 blubblibla

blubblibla

    Mitglied

  • Banned
  • PunktPunkt
  • 3.688 Beiträge

Geschrieben: 12 Juni 2014 - 19:02

Die Ausgabe von dmesg sagt mir leider überhaupt nichts, aber der Miner erscheint dort zumindest schonmal.


Das sind die Ausgaben des Ringpuffers, das beinhaltet auch die Ausgaben der Treiber. Und wie Du selbst schon richtig erkannt hast, taucht der Miner dort auf. Damit kann man davon ausgehen, daß Du kein Treiberproblem hast.
 

Die Ausgabe von lsusb sollte doch auch den Miner enthalten, oder. :unsure:


Wenn ich getzt davon ausgehe, daß Du lsusb als normaler Benutzer ausgeführt hast und nicht als root, dann würde ich als erstes auf ein Problem mit den Zugriffsrechten tippen. Normalerweise darf nur root auf die USB-Geräte direkt zugreifen.

 

Die einfachste Möglichkeit ist, den Benutzer, unter dem bfgminer laufen soll, der Gruppe root hinzuzufügen (gilt für Debian, Ubuntu/Mint siehe unten):

 

usermod -G root -a miner

 

Danach neu einloggen, damit die Gruppen neu gesetzt werden, und dann sollte es laufen (lsusb und bfgminer :-) ). Ich würde Dir desweiteren empfehlen, einen eigenen Benutzer anzulegen, mit dem der bfgminer läuft und nur diesen in die Gruppe root aufzunehmen,

 

Eine weitere Möglichkeit wäre, die Zugriffsrechte des USB-Geräts zu verändern. Das ist aber ein kleines Bischen mehr Arbeit.

 

Wenn es dann immer noch nicht geht, dann führe lsusb mal als root aus (z.B. sudo lsusb).

 

 

P.S.

Mint basiert ja auf Ubuntu, da kann es sein, daß es eine andere Gruppe ist, z.B. dialout. Welche das ist bekommst Du so raus:

 

1. Miner neu einstecken

 

2. Gucken, ob er erkannt wird:

 

dmesg|tail -18
[ 1971.742111] usb 1-1.2: new high-speed USB device number 3 using ehci-pci
[ 1971.839681] usb 1-1.2: New USB device found, idVendor=0403, idProduct=6014
[ 1971.839686] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1971.839689] usb 1-1.2: Product: BitFORCE SHA256 SC
[ 1971.839692] usb 1-1.2: Manufacturer: Butterfly Labs
[ 1971.839694] usb 1-1.2: SerialNumber: FTWW086L
[ 1971.852537] usbcore: registered new interface driver usbserial
[ 1971.852555] usbcore: registered new interface driver usbserial_generic
[ 1971.852567] usbserial: USB Serial support registered for generic
[ 1971.856885] usbcore: registered new interface driver ftdi_sio
[ 1971.856910] usbserial: USB Serial support registered for FTDI USB Serial Device
[ 1971.857179] ftdi_sio 1-1.2:1.0: FTDI USB Serial Device converter detected
[ 1971.857239] usb 1-1.2: Detected FT232H
[ 1971.857243] usb 1-1.2: Number of endpoints 2
[ 1971.857248] usb 1-1.2: Endpoint 1 MaxPacketSize 512
[ 1971.857252] usb 1-1.2: Endpoint 2 MaxPacketSize 512
[ 1971.857256] usb 1-1.2: Setting MaxPacketSize 512
[ 1971.857541] usb 1-1.2: FTDI USB Serial Device converter now attached to ttyUSB0
 

3. Rechte des Geräts nachschauen:

 

ls -l /dev/ttyUSB0
crw-rw---- 1 root dialout 188, 0 Jun 12 20:49 /dev/ttyUSB0

 

Hier siehtst Du, daß nur der Benutzer root und die Gruppe dialout Zugriff haben.

 

4. Benutzer in die passende Gruppe aufnehmen:

 

usermod -G dialout -a miner

 

Getestetet mit Ubuntu 14.04 LTS :D

 

Verdammter Distributions-Mischmasch, jeder machts anders... :P


Bearbeitet von blubblibla, 12 Juni 2014 - 20:59,


#7 Marikus

Marikus

    Mitglied

  • Mitglieder
  • PunktPunkt
  • 47 Beiträge

Geschrieben: 13 Juni 2014 - 19:37

Hallo Blubblibla,

 

vielen Dank für diese umfassende und an sich leich verständliche Antwort!

 

Ich werde erstmal ein paar Tage brauchen, um das hinzukriegen. Bei mir klappt das alles nicht so recht, aber das liegt an meinen eigenen Unzulänglichkeiten mit Linux. Zum Beispiel besteht mein jetziger Username anscheinend dummerweise aus mehreren Wörtern, und damit gibts im Terminal Problemchen. Einen zweiten User anlegen ging auch nicht (wird einfach nicht gemacht...). Vielleicht liegt das ganze auch daran, daß ichs auf USB-Stick als persistente Version laufen habe, und es da einige Einschränkungen gibt (z.B. kein zweiter User erstellber, etc.Keine Ahnung ob´s so ist - ich werd´s ´rauskriegen). Diese Baustelle werde ich erstmal in Eigenregie in Ordnung bringen, dann melde ich mich hier zum Thema wieder.


Bearbeitet von Marikus, 13 Juni 2014 - 19:46,


#8 blubblibla

blubblibla

    Mitglied

  • Banned
  • PunktPunkt
  • 3.688 Beiträge

Geschrieben: 13 Juni 2014 - 20:51

Ich werde erstmal ein paar Tage brauchen, um das hinzukriegen. Bei mir klappt das alles nicht so recht, aber das liegt an meinen eigenen Unzulänglichkeiten mit Linux.


Hab Geduld, das wird schon mit der Zeit.
 

Zum Beispiel besteht mein jetziger Username anscheinend dummerweise aus mehreren Wörtern, und damit gibts im Terminal Problemchen.


Das bezweifle ich, es kann höchtens sein, das Dir die Oberfläche was anderes anzeigt. :-) Ein paar Befehle zum Thema Benutzer:
 
Nur Dein Benutzername:
 
whoami
benutzername
 
Benutzername mit primärer Gruppe und sekundären Gruppen:

id -a
uid=666(benutzername) gid=666(benutzergruppe) Gruppen=666(benutzergruppe),4(adm),20(dialout),24(cdrom),29(audio),46(plugdev),116(lpadmin),118(admin),124(sambashare),131(kvm),132(libvirtd)

Alle angemeldeten Benutzer:

who
benutzer1    :0           2014-06-13 19:41 (:0)
benutzer1    pts/1        2014-06-13 20:42 (:0.0)

 

Detailierte Benutzerinformationen:

 

finger benutzername
Login: benutzername                      Name: Benutzer Name
Directory: /home/benutzername                Shell: /bin/bash
On since Fri Jun 13 19:41 (CEST) on :0 from :0 (messages off)
On since Fri Jun 13 20:42 (CEST) on pts/1 from :0.0
   7 seconds idle
No mail.
No Plan.

 

oder

grep benutzername /etc/passwd
benutzername:x:666:666:Benutzer Name,,,:/home/benutzername:/bin/bash

 

Und zu guter Letzt, wenn Du im Terminal Ausdrücke, hast die Leerzeichen enthalten, dann helfen Anführungszeichen (es gibt noch andere Methoden, aber ich glaub das is dann zuviel auf einmal). Zum Beispiel:

 

grep "Benutzer Name" /etc/passwd
benutzername:x:666:666:Benutzer Name,,,:/home/benutzername:/bin/bash

 

Einen zweiten User anlegen ging auch nicht (wird einfach nicht gemacht...). Vielleicht liegt das ganze auch daran, daß ichs auf USB-Stick als persistente Version laufen habe, und es da einige Einschränkungen gibt (z.B. kein zweiter User erstellber, etc.Keine Ahnung ob´s so ist - ich werd´s ´rauskriegen). Diese Baustelle werde ich erstmal in Eigenregie in Ordnung bringen, dann melde ich mich hier zum Thema wieder.


Nun, persistenete Systeme sind gegen Veränderungen geschützt, das ist Sinn und Zweck der Sache. Damit machst Du es Dir für den Anfang nur unnötig schwer.

 

Ich wünsch Dir viel Erfolg, und wenn Du Fragen hast, dann meld Dich einfach.


Bearbeitet von blubblibla, 13 Juni 2014 - 21:01,






Also tagged with one or more of these keywords: FTDI, Linux Mint, Butterflylabs, Jalapeno, Single SC, Treiber, USB, Erkennen, Driver

0 Benutzer lesen gerade dieses Thema

0 Mitglieder, 0 Gäste, 0 anonyme Nutzer